- Case StudyHelp.com
- Sample Questions
Book Your Assignments Today!
Securing Higher Grades at Least Amount Of Effort?
Get Assignment Answers from Top-notch Tutors – specialize in your subject areas
Assessment task 2—Analytical report (alternative B)
|Due date:||1PM AEST, Thursday of Week 10 (October 8)||ASSESSMENT|
|Length:||3000 words ±10% (excluding front matter and reference list)|
This assessment task relates to course learning outcomes numbers 1 to 5.
Before starting this assessment read the marking criteria (below) and information about business report writing on the Academic Learning Centre (ALC) website:
https://moodle.cqu.edu.au/course/view.php?id=1497 (Choose the ‘Academic Communication’ door.)
The course website also provides useful information in regard to the development of this assessment item. In particular, you must read the Assignment Writing Requirements document on the course website. This document outlines course specific assignment requirements in some detail.
The primary purpose of this assessment task is to help students develop skills in the use of OM principles, theories and models in the analysis of the current operations of a service industry organisation. The assignment requires you to analyse the current situation, identify the operational problems within the organisation, and develop a set of recommendations that, when implemented, will overcome the identified problems without creating new ones. In this assessment piece you are expected to provide a solution, recommendations and action plan.
The secondary purpose of this assignment is to give students the opportunity to further develop analysis and problem identification and problem solving skills, as well as skills in presenting an argument for change within the framework of a business report.
Assessment task 2 requires the writing of a business report. The report should explain what the current situation is, what problems are in evidence and how those problems should be addressed. As a business report it should be concise, accurate and actionable. At the same time, the report should be founded on appropriate Operations Management principles and theories, and be supported by appropriate evidence and discussion from relevant academic literature.
The assessment item is based on the case study titled Silvaro Motors (a fictitious company). You should read, and carefully analyse, the case and respond to the issues presented at the end of the case study within the context of a short business report. The objective of the case study is to provide an operations management situation that can be studied and analysed. You will need to put yourself in the role of a management professional who is asked by the organisation to identify the nature of the problem(s), why or how the problem happened or evolved, and make recommendations that will resolve it.
MGMT20085 1 Term 2, 2015
Case study: Purchasing and Inventory at Silvaro Motors
Helen Silvaro, CEO of Silvaro Motors, has just returned to her office after visiting the company’s newly acquired automotive dealership. The new dealership was the fourth Silvaro Motors dealership in a network that served a metropolitan area of over two million people. Beyond the metropolitan area, but within a 45-minute drive, was another half a million people. Each of the dealerships in the network marketed a different make of car and historically had operated autonomously.
Silvaro was particularly excited about this new dealership because it was the first “auto supermarket” in the network. Auto supermarkets differ from traditional car dealerships in that they sell multiple makes of cars at the same location. The newly acquired dealership sold a line of Daewoos from Korea, Mahindras from India and Cherys from China. This brought the total number of brands sold by the group to six.
Since the purchase of a bankrupt Mitsubishi dealership 15 years ago, Silvaro Motors had grown steadily. As the city was relatively small, it was difficult to expand within a single brand, so eventually Silvaro purchased a rundown Mazda dealership, and shortly afterwards, a small Hyundai dealership as well. Under her direction, all three dealerships saw rapidly improving sales figures and the Silvaro Motors network grew in strength and reputation.
Silvaro attributed this success to three highly interdependent factors. The first was volume. By maintaining a high volume of vehicle sales and turning over inventory rapidly, economies of scale could be achieved, this reduced costs and provided customers with a large selection. The second factor was a marketing approach called the “hassle-free buying experience.” Listed on each automobile was the “one price—lowest price.” Customers came in, browsed, and compared prices without being approached by pushy salespeople. If they had questions or were ready to buy, a walk to a customer service desk produced a knowledgeable sales person to assist them. Finally, and Silvaro thought perhaps the most important, was the after sales service. Silvaro Motors had established a solid reputation for servicing, diagnosing, and repairing vehicles correctly and in a timely manner—the service division’s motto was “do it once, do it right”.
High-quality service after the sale depended on three essential components. First was the presence of a highly qualified, well-trained staff of service technicians. Second was the use of the latest tools and technologies to support diagnosis and repair activities. And third was the availability of the full range of parts and materials necessary to complete the service and repairs without delay. Silvaro invested in training and equipment to ensure that the fully trained personnel and the latest technology were available at all sites. What she worried about, as Silvaro Motors grew, was the continued availability of the right parts and materials. She knew there was a fine line between too much and too little stock. With the new dealership, the complexity of inventory control had increased dramatically. This concern caused her to focus on the purchasing function and management of service parts, accessories and materials flows at both a supply chain level, and as an internal function.
Silvaro thought back on the stories in the newspaper’s business pages describing the failure of companies that had not planned appropriately for growth. These companies outgrew their existing policies, procedures, and control systems. Lacking a plan to update their systems, the companies experienced myriad problems that led to inefficiencies and an inability to compete effectively. She did not want that to happen to Silvaro Motors.
Each of the four dealerships purchased its own service parts and materials. Each location had its own purchasing officer and parts manager. Some purchases were based on forecasts derived from historical demand data, which accounted for factors such as seasonality. Batteries and alternators had a high failure rate in the winter, and air-conditioner parts were in great demand during the summer. Similarly, coolant was needed in the spring to service air-conditioners for the summer months, whereas antifreeze was needed in the autumn to winterise cars. Forecasts were also adjusted for special vehicle sales and service promotions, which increased the need for materials used to prepare new cars and to service other vehicles.
MGMT20085 2 Term 2, 2015
One thing that made the purchase of service parts and materials so difficult was the tremendous number of different parts that had to be kept on hand. Some of these parts would be used to service customer vehicles, others would be sold over the counter to retail customers, whilst others (particularly genuine replacement parts) were on-sold to trade customers. Some had to be purchased from the car manufacturers (genuine replacement parts and accessories) as most customers expected genuine replacement parts to be used, or because that was the only source of supply. Non-genuine replacement parts and accessories were purchased from a variety of suppliers and other parts and materials such as oils, lubricants, fan belts and other generic service parts and materials, could be purchased from any number of suppliers. In her mind, Silvaro considered that there were three main classes of inventory involved in the business (apart from vehicles), genuine spare parts, non-genuine spares, and generic parts, materials and consumables. Thus, she felt that there were three basic supply lines that needed to be managed. She was also concerned that the purchasing department maintained an awareness that the success of the dealership depended on (1) lowering costs to support the hassle-free, one price—lowest price concept, and (2) providing the right parts at the right time to support fast, reliable after-sales service.
As Silvaro thought about the purchasing of parts and materials, two concerns were evident: the amount of space available for parts storage and the level of financial resources available to invest in parts and materials. The acquisition of the auto supermarket dealership put an increased strain on both finances and space, with the need to support three different car lines at the same facility. Silvaro was acutely aware that inventory holdings cost money and reduced profits. She also knew that without proper inventory management, the company’s strategy could not be successful. Investment in excess inventory had to be avoided at all costs, and as space across all the locations was at a premium, a more systematic approach was needed. Silvaro wanted a ‘whole of organisation’ solution, and wondered what could be done in the purchasing, supply chain, and inventory areas to address some of these concerns and alleviate some of the pressures.
As a newly appointed Purchasing Manager at Silvaro Motors you are required to prepare a report for Ms Silvaro that addresses the following questions:
- How might purchasing and inventory management policies and procedures differ because the different types of service parts and materials (e.g. genuine parts; non-genuine parts; generic parts, materials and consumables) were purchased from different supply lines?
- What appear to be the main weaknesses of current purchasing and inventory management practices at Silvaro Motors, and how could these weaknesses be affected by the new acquisition?
- How can purchasing, supply-chain and inventory management concepts help Silvaro Motors reduce investment and space requirements whilst maintaining adequate service levels?
- What recommendations would you make to Ms Silvaro with respect to restructuring the purchasing and inventory functions for the Silvaro Motors dealership network?
The report should be a confidential report for the CEO, and be presented as a suitably professional document. It is expected that your discussion will refer to appropriate models and theories covered in this course, but your research should extend the theoretical discussion beyond the course material. The assessment criteria should give you a clear indication of what you need to include in this assignment. The report should include an effective introduction and conclusion; an executive summary of no more than one page to preface the report; and a table of contents to give guidance to the reader. The report should be accompanied by a letter of transmittal.
This assessment item involves researching your assigned topic to enhance your understanding of Operations Management concepts and utilisation of academic literature. If you are not familiar with the retail motor industry, some field and/or desk research would be advisable. Whilst you should AVOID using only textbooks, the prescribed textbook for the course must be cited in regard to broad operations management principles highlighted by the case. You are expected to present information and evidence from, and cite, at
MGMT20085 3 Term 2, 2015
LEAST ten (10) relevant peer-reviewed, academic journal articles (minimum requirement). Refer to your recommended readings for examples of academic journals. While you can cite these articles, you must find at least ten (10) peer reviewed journal articles not listed in the course materials. The quality and number of citations will demonstrate the breadth and depth of the literature used to formulate your argument. Your marker is interested in the analysis that you have developed from YOUR review of the literature and how well you use the literature to respond to the topic. AVOID presenting a descriptive account ONLY of your readings. What is required in this assessment is a critical evaluation of the evidence in the case and the academic literature as it relates to the specific details of the case study. Your marker is interested in the conclusions that YOU arrive at from YOUR evaluation of the literature and of the case study.
MGMT20085 – OPERATIONAL ANALYSIS AND EFFECTIVENESS Assessment task 2 – Marking criteria for analytical report (Alt. B)
Reports will be assessed on the extent to which they meet each of the following criteria:
|CONTENT: Does your case study analysis demonstrate:||Marks|
|a thorough knowledge and critical analysis of the problem(s) identified in case study expressed||15%|
|within a well developed business report?|
|a critical review of the academic literature relevant to the problem(s) identified in case study?||15%|
|(Should be embedded in the discussion, not presented as a separate section.)|
|appropriateness of evidence‐based responses to, and analysis of, the case study topic question(s)||15%|
|including an effective analysis of the situation along with relevant discussion of alternative solutions?|
|a well structured, concise and clear presentation of appropriate recommendations based on theory||15%|
|and evidence from the literature?|
|appropriate use of argument within the paper, including a properly structured introduction and||10%|
|relevant and accurate use of the literature? (minimum to pass this criterion is TEN (10) relevant||15%|
|academic journal articles and appropriate reference to the prescribed textbook)|
|PRESENTATION: Does your case study analysis demonstrate:|
|clarity of expression/grammar and correct spelling using Australian English||5%|
|strict conformity to referencing style of the Author‐date system of referencing as set out in the||5%|
|Australian Government Publishing Service 2002, Style Manual for Authors, Editors and Printers, 6th|
|edn, AGPS, Canberra? (Refer to the Abridged Harvard Referencing Guide)|
|appropriate presentation (short business report) formatted as required by the Assignment Writing||5%|
|Requirements document and presented within the limit of 3000 ±10% words.|
To get assignment samples chat with our online assignment adviser (Chat with our 24 x 7 Online Agents).
MGMT20085 4 Term 2, 2015